Also available within our fire suppression products range are the high pressure systems. Like their Low Pressure counterparts, our High Pressure Systems can either be DIRECT or INDIRECT.

DHPINT Model 2 

Direct High Pressure System

Detection Tubing is routed around the risk area. When the temperature reaches 120°C or the Detection Tubing is touched by a flame, the Detection Tubing bursts and the extinguishing agent is expelled through the burst. Because we design our systems against the specific risk environment not only will our system extinguish the fire, we also have enough extinguishing agent to inert the area to avoid re-ignition.

We recommend connecting our volt free pressure switches to our systems that will cut the power source and activate an alarm in the event of activation.As with all our fire suppression products, a Direct High Pressure Firetrace® System suppresses the fire before it has time to take hold. Our Unique Pneumatic

 

 

Capture of FS5IHP For website

Indirect High Pressure System

Our Indirect High Pressure Firetrace® System suppresses the fire before it has time to take hold. Our Unique Pneumatic Detection Tubing is routed around the risk area. When the temperature reaches 120°C or the Detection Tubing is touched by a flame, the Detection Tubing bursts and the extinguishing agent is expelled through plumbed diffuser nozzles located around the risk area. 

Like the Direct High Pressure system, we recommend connecting a volt free pressure switch to cut the power source and activate an alarm in the event of activation.
Our high pressure systems range from 2Kg, 5Kg, 9Kg, 22Kg and 45Kg. Predominantly our High Pressure Systems uses Co2 as the extinguishing medium. We have many years experience with designing and installing our fire suppression products and would recommend the best cylinder size at the time of quoting.