Our most popular range within the Firetrace fire suppression products is the Low Pressure Systems. These can either be DIRECT or INDIRECT.

 

Direct Low Pressure System

FS1DLPG30c

A Direct Low Pressure Firetrace® System suppresses the fire before it has time to take hold. Our Unique Pneumatic Detection Tubing is routed around the risk area.

When the temperature reaches 120°C or the Detection Tubing is touched by a flame, the Detection Tubing bursts and the extinguishing agent is expelled through the burst.

Because we design our systems against the specific risk environment, not only will our system extinguish the fire, we also have enough extinguishing agent to inert the area to avoid re-ignition.

We recommend connecting our volt free pressure switches to the systems that will cut the power source and/or activate an alarm in the event of activation.  

 

Indirect Low Pressure Systems

 

Our Indirect Low Pressure Firetrace® System suppresses the fire before it has time to take hold. Our Unique Pneumatic Detection Tubing is routed around the risk area.

When the temperature reaches 120°C or the Detection Tubing is touched by a flame, the Detection Tubing bursts and the extinguishing agent is expelled through plumbed diffuser nozzles located around the risk area. This not only suppresses the fire but inerts the area to prevent re-ignition due to its design.

Like the Direct Low Pressure system, we recommend connecting a volt free pressure switch to cut the power source and/or activate an alarm in the event of activation.

DPP 0213.2

 

DPP 0193.2Our low pressure systems range from 1Kg – 9Kg.

 

 

Choose from either one of the following extinguishing mediums:

ABC Dry Powder
FE-36
NOVEC 1230

AFFF Foam (Indirect Only)