Firetrace Stops Fires Where They Start

 

Direct Low Pressure Systems

A Direct Low Pressure Firetrace System suppresses the fire before it has time to take hold. Our Unique Pneumatic Detection Tubing is routed around the risk area.

When the temperature reaches 120°C or the Detection Tubing is touched by a flame, the Detection Tubing bursts and the extinguishing agent is expelled through the burst.

Because we design our systems against the specific risk environment, not only will our system extinguish the fire, we also have enough extinguishing agent to inert the area to avoid re-ignition.

We recommend connecting our volt free pressure switches to the systems that will cut the power source and/or activate an alarm in the event of activation.

Firetrace Direct Low Pressure Automatic Fire Suppression System

 

Indirect Low Pressure Systems

Our Indirect Low Pressure Firetrace System suppresses the fire before it has time to take hold. Our Unique Pneumatic Detection Tubing is routed around the risk area.

When the temperature reaches 120°C or the Detection Tubing is touched by a flame, the Detection Tubing bursts and the extinguishing agent is expelled through plumbed diffuser nozzles located around the risk area. This not only suppresses the fire but inerts the area to prevent re-ignition due to its design.

Like the Direct Low Pressure system, we recommend connecting a volt free pressure switch to cut the power source and/or activate an alarm in the event of activation.

Firetrace Indirect Low Pressure Automatic Fire Suppression System

DPP 0213.2

DPP 0193.2Our low pressure systems range from 1Kg – 9Kg.

Choose from either one of the following extinguishing mediums:

ABC Dry Powder
FE-36
NOVEC 1230

AFFF Foam (Indirect Only)

 

“Firetrace fire suppression system in my opinion is a no brainer piece of kit. Firetrace offers value for money, knowledge, great after sales service and are all round nice people." - VW Campervan installation